120/240Vac American Standard Split Phase Inverter

The American Standard 120/240V Split-Phase Inverter is specifically designed for North America’s single-phase, three-wire power grid. It outputs two 120V AC lines with a 180° phase difference (L1-N, L2-N); when combined, these lines provide 240V (L1-L2). A single unit can power all household loads—120V for lighting, refrigerators, and TVs, and 240V for air conditioners, dryers, and EV chargers—without the need for an additional transformer. With mainstream power ratings ranging from 5 to 12 kW, it balances high-frequency lightweight designs with low-frequency stability. Leading products have passed Canadian CSA standards, making it a core component of residential photovoltaic and storage systems in North America.

Get a Quote

Our BZP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.

2 phase 3 wire output.jpg

DC Input connected solar panels,battery bank or other DC power supply

AC Output connected split phase load

Model		BZP-30KW		BZP-40KW
Isolation mode		Low Frequency Transformer
DC Input	Rated voltage (Vdc)	240V	300V	360V
	Rated current（A）	125A	100A	111A
AC Output	Rated output power	30KW		40KW
	Output waveform	Pure Sine Wave
	Rated Voltage	120/240V±3%	240/480VAC±3%	120/240V±3%	240/480VAC±3%
	Phases	Split phase	2 phase 3 wire	Split phase	2 phase 3 wire
	Rated current（A）	125A	62.5A	166A	83.3A
	Frequency	50Hz or 60Hz
	Power Factor（PF）	1
	Overload Ability	150%, 5 seconds
	Efficiency	>93%
	Waveform distortion rate (THD)	<3%（Linear load）
	Dynamic Response (0 to 100% load)	5%，≤50ms
	Display	LCD
	Running mode	Working continuously
	Electrical insulation properties	2000Vac, 1 Minute
Communication interface (optional)		RS485
Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
	Cooling method	Fan-cooled
	Short-circuit protection	No automatic recovery, need to restart the machine
Working environment	Noise ( 1 meter)	≤50dB
	Degree of protection	IP20（indoor）
	Working Altitude（m）	≤2000
	Working temperature	-25~+55℃
	relative humidity	0~90%，non-condensing